MULTIPERF
I wrote MULTIPERF to solve interior ballistics for a launch motor. This type of motor must have a very fast action time so that all the propellant burns while the missile is still in the launch tube. This is to prevent the crew serving the weapon from being exposed to the motor exhaust gases during launch. The only way to acheive this is with a very thin net web. In order to acheive this and still generate enough total impulse is to use multiple single perforated grains burning on both the inside and the outside of the grain.
MULTIPERF generates pressure/time and thrust/time curves for rocket motors Incorporating multiple single-perforation grains that burn on both the inside and outside grain surfaces (uninhibited). The grains are assumed to be inhibited at a pin plate attachment end, so they only burn at one end (not both). The propellant combustion is all transient with insufficient action time for steady state to develop. This means the propellant burns out while the motor case is still pressurizing, transitioning from pressurization to blow down with no steady state in between like normal motor. An example curve for such a motor is shown below.

MULTIPERF will alternatively model single grains inhibited on the outside only, either core-burning or end-burning, with two, one or no ends inhibited. An example curve for this (conventional) motor type is shown below.

End-burning grains can either be right cylinders or tapered. (For tapered grains you must specify the grain diameters at both ends of the grain).
The solution is generated using a two-part, piecewise solution for the ignition transient/ steady state and blow down transient phases. Computations are derived from mass and momentum equations of state, burn rate equation, the ideal gas law and ideal thrust equations. The equations governing P/t and F/t for the ignition/steady state and blow down phases are shown below. Steady state occurs when dp/dt is small and the first equation reduces to closed form. Transition to blow down occurs when the grain end area=0.


Privacy Policy
Web site and all contents Copyright Explosives Consulting LLC. All rights reserved.