Early Years
I was graduated from SUNY Stony Brook in 1976 with a BS in Chemistry. My research advisor knew Dr. W.S.Chang at the Bureau of Explosives in Ediston, NJ and recommended me to him for a job. I worked there for a year assigning DOT hazard classifications to energetics and other hazardous materials. One of my first jobs was to test the Grucci fireworks used in the 1976 200 year July 4 celebration in Washington DC.
We also tested Coca Cola syrup that was transported in tanker trucks to bottling plants. If I relate that story I might get sued so ask me in private sometime. The next year I took a job with the Ensign Bickford Company in Simsbury, CT. EBCo had licensed NONEL shock tube from Nitro Nobel in Sweden and was in the process of establishing commercial NONEL detonator production in Connecticut.
I worked for four years on that project, first developing pyrotechnic fuze technology, later starting up the detonator plant. During that period, I attended evening classes at the University of Hartford and earned a BS Civil Engineering degree.
The next big project at EBCo was a PETN plant being constructed at their Graham, KY detonating cord facility. I transferred to Kentucky and worked as a construction engineer. At commissioning, I transitioned to the startup teams for the APV solvent recovery distillation unit, the Plinke NAC/SAC acid recovery unit, and the Biazzi continuous PETN nitration unit. After completion of commissioning, the designated Plant Superintendent quit, and I lobbied for the position and was awarded the job.
I had twenty-three hourly and salaried staff reporting to me running a three-shift operation. The plant struggled to meet granulation quality requirements during its initial operation. Our customer, the EBCo cord plant, hated our product, and had to purchase Cap Grade PETN from DuPont and Hercules to make production. But after months of hard work and modifications to the recrystallization section the quality of our product was so good that the cord plant preferred it over that of the outside suppliers and converted 100% to internally produced PETN from then on. We subsequently developed Superfine and Medium Fine PETN grades.
After working in Graham for a few years, I transferred back to Simsbury to rebuild the pilot plant that was destroyed in a massive explosion that unfortunately killed three EBCo engineers attempting to develop a process for making the high temperature explosive PYX. After that I started Structural Engineering Services and then moved to Utah to help modernize the Trojan Explosives plant in Spanish Fork in my early career, perhaps stories for another page on this site.
The picture below was taken after the startup of the Brazzi PETN unit at Graham. I am kneeling stage left of the first drum of PETN produced by the plant. We proceeded to shoot a hard-hat full of the product on the hill outside the plant fence. Bill Spraggs, Terry Fuller, Jack O'Brien, Serge Eggers, Jeff Coderre, and other famous characters from the explosives good old days also appear in the picture.
The second image shows an aerial view depicting, from left to right the Biazzi plant, control room/boiler house, Plinke unit and APV unit. Ancillary structures lie to the north.


Privacy Policy
Web site and all contents Copyright Explosives Consulting LLC. All rights reserved.